Follow

What settings should I use for my Garmin 1000 with Garmin Power Courses?

One of Best Bike Split’s key features is the Garmin Power Course. This file when paired with a Garmin Edge cycling computer allows you to receive location based power instructions while racing. Each Garmin device is slightly different so we have created the guide below to help you get the optimal settings for your device. Remember Garmin Power Courses require you to be riding on the actual course because power targets are based on latitude and longitude points.

Before starting, make sure you always have the latest firmware installed on your device.

Data Fields for All Edge Devices

We recommend the following data fields when using Garmin Power Courses on your device. These settings will help guide your actions as power target alerts are prompted.

  1. 3 Second Power Average
  2. 10 Second Power Average
  3. 30 Second Power Average
  4. CRS. Pt. Distance (not available on all devices)

Garmin 1000

Power Course Settings:

Use the following screen shots to help you setup your Edge 1000 for optimal use with Garmin Power Courses.

General Settings

  1. Select the Wrench Icon
  2. Select Activity Profile
  3. Select Race
  4. Select Data Screens
  5. Select Map
  6. Turn Map to Off and Data Fields to None
  7. Return to Race Options and Select Navigation
  8. Select Map
  9. Use Settings Shown on Screen 9 Below
  10. Return to Navigation settings and Select Routing
  11. Use Settings Shown on Screen 11 Below
1000 Screen 1 1000 Screen 2 1000 Screen 3 1000 Screen 4 1000 Screen 5 1000 Screen 6 1000 Screen 7 1000 Screen 8 1000 Screen 9 1000 Screen 10 1000 Screen 11

Course Settings

  1. Select Courses
  2. Select Settings Icon (3 lines)
  3. Use Settings Shown on Screen 3 Below
1000 Screen 1 1000 Screen 2 1000 Screen 3

Specific Course Settings

  1. Select Your Course
  2. Select Settings
  3. Use Settings Shown on Screen 3 Below
1000 Screen 1 1000 Screen 2 1000 Screen 3
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk