Follow

What settings should I use for my Garmin 810 with Garmin Power Courses?

One of Best Bike Split’s key features is the Garmin Power Course. This file when paired with a Garmin Edge cycling computer allows you to receive location based power instructions while racing. Each Garmin device is slightly different so we have created the guide below to help you get the optimal settings for your device. Remember Garmin Power Courses require you to be riding on the actual course because power targets are based on latitude and longitude points.

Before starting, make sure you always have the latest firmware installed on your device.

Data Fields for All Edge Devices

We recommend the following data fields when using Garmin Power Courses on your device. These settings will help guide your actions as power target alerts are prompted.

  1. 3 Second Power Average
  2. 10 Second Power Average
  3. 30 Second Power Average
  4. CRS. Pt. Distance (not available on all devices)

Garmin 810

Power Course Settings:

Use the following screen shots to help you setup your Edge 810 for optimal use with Garmin Power Courses.

General Settings

  1. Select the Wrench Icon
  2. Select Activity Profile
  3. Select Train
  4. Select Training Pages
  5. Turn Map to None - Off
  6. Select Navigation
  7. Select Map
  8. Use Settings Shown on Screen 8 Below
  9. Select Routing
  10. Use Settings Shown on Screen 10 Below

810 Screen 1 810 Screen 2 810 Screen 3810 Screen 4 810 Screen 5 810 Screen 6810 Screen 7 810 Screen 8 810 Screen 9810 Screen 10

Course Settings

  1. Select Folder Icon
  2. Select Courses
  3. Select Settings Icon (3 lines)
  4. Use Settings Shown on Screen 4 Below

810 Screen 1 810 Screen 2 810 Screen 3810 Screen 4

Specific Course Settings

  1. Select Your Course
  2. Select Settings
  3. Select Map Display
  4. Use Settings Shown on Screen 4 Below

810 Screen 1 810 Screen 2 810 Screen 3810 Screen 4

Garmin Power Course Edge 810 Settings

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk